How To Find A Hole In An Air Mattress

Don’t fret! It sucks when your air mattress begins to leak. If your air mattress doesn’t maintain its shape for more than 48 hours from one complete air pump or sinks uncomfortably inwards when you lay on it, then it’s very like it is leaking air somewhere because of a hole. In this article, we will show you how to find a hole in an air mattress, figure out what cause leaks in air mattresses, and what you can do to extend the lifespan of your air mattress.

How To Find And Repair An Air Mattress Leak

  1. Test for a leak – Blow up your mattress then leave it inflated overnight. Put weight on it like with several books. If in the morning you cannot sit comfortably on the mattress without sinking more than 2 inches, then there is a leak.
  2. Wet the back of your hand and search the surface of your air mattress – If you feel the air blowing on your wet hand, then you have found a leak.
  3. Check the valve where you plug your pump in – The valve is one of the common places where air can escape. If you feel air escaping after closing the valve, call the manufacturer of your air mattress to order a replacement. Repairing the valve at home is difficult.
  4. Find the leak by fully inflating your air mattress – The high air pressure inside the mattress will force air out of the leak areas. Start searching the surface of your air mattress with your hands until you feel some air blowing out.
  5. Check the base or “bottom” of your air mattress – Stand your air mattress up against the wall and search the bottom part of your air mattress. Friction or sharp objects underneath the air mattress may have punctured or torn the base of the air mattress.
  6. Use a permanent marker and circle or draw an arrow where the leak is – This will help you find the leak again for patching.
  7. Use a patch kit – Most air mattresses come with at least one patch kit. However, you can order one online, buy at a local outdoor store, or order from your manufacturer. A patch kit comes with glue, sandpaper, and some patches. Patches will work on plastic or vinyl surfaces.
  8. Deflate the air mattress – We don’t want air getting underneath the patch or else the patch won’t be able to seal the leak properly.
  9. Clean the sand the area around the hole – We don’t want dust or dirt particles to get underneath the patch. A smooth surface will let the patch stick effectively.
  10. Cut the patch 1.5x bigger than the hole – The patch should be big enough to cover the hole and some more to ensure the leak will stop.
  11. Apply glue to the area of the leak and on the patch, then attach the patch on top of the hole – Make sure the glue is never hot. Hot glue will melt your air mattress. Some patches already have glue and can be attached to the leak area like a sticker.
  12. Press down firmly on the patch and smooth it out – We want to ensure the patch is making full contact with the surface so there can be no more air leaks from the hole.
  13. Test your mattress overnight once more for safety – Put weight on it again like with several books. If the air mattress does not lose its shape, sink too deeply, or continues to leak air where the hole was, then your air mattress has been repaired!

What Causes Air Mattress Leaks

  • Manufacturer defect – This can happen when you begin to use or after a short period of use.
  • Use-related damage – It’s not a good idea to jump on a mattress, place it on a rough surface, or allow pets and placing sharp objects on the mattress.
  • Worn out over many uses – When you use the air bed every night, you can expect the air mattress to develop leaks due to friction eventually.
  • Too much weight placed on the air mattress – since air mattresses are imperfect, when you put more weight on your air bed, the air inside is under high pressure. Add enough weight, and a seam might burst.
  • Physical tear from folding – A leak may form if you fold your air mattress often enough. If you often travel with your air mattress and use it frequently, be sure to fold and pack it away with extra care.

Expectation When Using Air Mattresses

  • Know that all air mattresses lose air naturally. No air mattress is ever airtight. As you climb onto the bed, your weight will apply more inner pressure that may cause a leak somewhere.
  • Fixing your air mattress may void your warranty. Please check your warranty policy or call your manufacturer to find out if do-it-yourself repairs will end your warranty policy.
  • When temperatures are low, the cool environment will also cause your mattress to shrink. The same applies to high altitude uses.
  • Newly unboxed air mattresses need time to expand and “stretch” before they become firm. It is recommended you inflate your air mattress and let it sit for at least one night on its own before using. Setting the new air mattress aside will give it time to expand to its maximum capacity before use.
  • Air mattresses, when used occasionally, can last anywhere between 5 to 8 years. When it’s time, it’s time. Air mattresses have a lower usage lifespan because of the nature of its light-weight design and comfort.
  • Avoid jumping or excessive weight. Excessive force and pressure include having too many sleeping bodies or children climbing on and off constantly.

Having trouble repairing the air bed? Maybe it’s time to replace it. We wrote a guide on the best air mattress reviews. In the guide, we go through the latest and top rated air mattresses on the market. Be sure to check it out!

Our Final Thoughts

Knowing how to find a hole in an air mattress will come in handy, especially if you find yourself packing and unpacking the bed a lot. We don’t want you to purchase an air mattress only to find yourself frustrated from what can unexpectedly happen. Taking the time to find the hole effectively, understanding what to expect from your air mattress, how to use your air mattress, and knowing what causes leaks will help avoid damage and extend the lifespan of your comfy air bed. They should be enjoyed after all.

We will be happy to hear your thoughts

Leave a reply